Troubleshooting Windows Installation On Raspberry Pi Leave a comment

https://hanumatic.com/download-windows-10-x64-activated-iso-archive-22h2-without-key-rufus/
https://aldevino.com/2025/04/11/download-windows-10-professional-64-bit-usb-image-directly-latest-no-defender/

Here’s a step-by-step guide to troubleshoot Windows installation issues on your Raspberry Pi:

Step 1: Basic Troubleshooting

Before we dive into the advanced troubleshooting steps, let’s check some basic things:

• Ensure your Raspberry Pi has at least 4GB of RAM. If you have less than this, consider upgrading.

• Make sure your USB ports are working properly.

• Check that your Wi-Fi adapter is enabled and configured correctly.

Step 2: Install Windows on a Different Boot Device

Try booting into the Raspberry Pi’s built-in bootloader (e.g., Raspbian) before installing Windows. This will help you determine if the issue lies with the installation process or with the hardware.

• Connect to your computer using a USB cable.

• Hold down the ‘Delete’ key while powering on your PC.

• Release the key when you see the BIOS setup screen.

• Save and exit the BIOS settings.

Step 3: Inspect the Boot Process

Check the boot process for any errors:

• Run dmesg to check system messages before the installation begins:

sudo dmesg | tail

This will display error messages. If you encounter any issues, take note of the error messages.

• If using Raspbian, run bootinfo to see if there are any configuration files that might be causing issues:

sudo bootinfo

Step 4: Check System Configuration

Verify that your Raspberry Pi’s system configuration is set up correctly:

• Run sudo cat /etc/failover.conf to check for any custom failover settings.

• Ensure the f2w service is enabled and running:

sudo systemctl status f2w

Step 5: Check Windows Installation Logs

Access your PC’s Event Viewer to see if there are any error messages related to the installation process:

• Open Event Viewer (Windows key + R, type “eventvwr” and press Enter).

• Navigate to Application > Error.

• Look for errors that might be related to the Windows installation.

Step 6: Disable Any Additional Boot Processes

If you encounter issues with boot processes or system configuration, try disabling any additional boot processes:

• Run sudo systemctl disable f2w (if configured).

• Run sudo systemctl isolate f2w (if using systemd).

• Run sudo systemctl restart f2w (if enabled).

Step 7: Check for Conflicting Devices

Ensure there are no conflicting devices or drivers that might be causing issues:

• Run sudo lshw -t disk to check disk usage and identify any potential conflicts.

• Run sudo lsusb to scan USB devices and detect any issues.

Step 8: Reinstall Windows (Last Resort)

If none of the above steps resolve the issue, you can try reinstalling Windows:

• Use a live USB drive or CD/DVD to install Windows directly from within Raspbian.

• Refer to the official Microsoft website for troubleshooting guides specific to your version of Windows.

By following these steps, you should be able to identify and resolve common issues with installing Windows on your Raspberry Pi.